background image

 

SERVICES

 

Page

 103 

mode” during the “Recalling a profile permanently” 
programming described below.  

Recalling a profile permanently 

Allows recalling the PRESENT, ABSENT and RELAX profiles permanently, 
or it allows enabling automatic profile recall according to the set time bands. 

Note: the profile used by Europa GSM can be displayed only 

through the ST 600 Personal Phone system telephone. 

Note:  profile recall is not password-protected. 

DEFAULT

Home 10 

and 

11 

configurations: AUTOMATIC mode (since the daily time 

bands are not set, the PRESENT profile will always be used); 

Office 20

21 

and 

22 

configurations: AUTOMATIC mode (PRESENT profile 

from 8.00 a.m. to 12.00 p.m. and from 2.00 p.m. to 6.00 p.m.; ABSENT profile 
during the rest of the day). 

PRESENT profile 

Allows passing, alternatively, from permanent PRESENT profile, to automatic 
profile recall.  

 

 (confirm) 

 

¾

 

Pick up the handset of the system administrator extension (extension 
41). 

¾

 

Dial the code 230. 

¾

 

Wait for the enabled/disabled service message and for the confirmation 
tone and hang up.  

Note: by sending the code 230 via SMS, you will recall the 

PRESENT profile only. . 

ABSENT profile 

Allows passing, alternatively, from permanent ABSENT profile, to automatic 
profile recall. 

 

 (confirm) 

 

¾

 

Pick up the handset of the system administrator extension (extension 
41). 

¾

 

Dial the code 231. 

¾

 

Wait for the enabled/disabled service message and for the confirmation 
tone and hang up.  

Summary of Contents for Europa GSM



























































































































































Reviews: