Addressable Fire Panel MAGPRO96
- Installation and Programming Manual
61
Loop Short
Short-circuit in the loop.
Loop Break
Interrupted loop.
Loop Zero Address
There is a device without address number (a device with address 0 is applied).
Activated
Activated output.
Network Fault
Redundant network breakdown.
Wrong Error Code
Unknown code for fault message.
Alarm Output
Alarm or fire event form output.
Earth Fault function DIS-
ABLED
The Earth Fault indication is disabled.
Zone In Test
The zone is in test mode.
Transmitting device active
The Fire output is activated.
Extinguishing output active
The Extinguishing output is activated.
Sirens active
The sounders are activated.
User log off
User level exit.
Installer log off
Installer level exit.
User log on
User level entry.
Installer log on
Installer level entry.
GAS ALARM!
Alarm signal from activated gas detector.
PANIC!
Panic alarm signal from device.
Battery High Resistance
High value (Ri>0.3Ω) of the battery internal resistance.
It is highly recommended to replace the battery immediately!
High Resistance Disabled
The indication for high battery resistance is disabled.
Internal Buzzer Disabled
The internal buzzer is disabled.
Appendix B
MAGPRO Device Types
1. Addressable Detectors
• MAGPRO-HD1
- Temperature detector. 3 temperature classes for operation: A1R (58º,RoR), A2S (60º), BS
(75º).
• MAGPRO-SD1
- Optical-smoke detector. 4 level of sensitivity: High, Normal, Medium and Low.
• MAGPRO-HSD1
- Combined detector (optical-smoke and RoR). 4 level of sensitivity: High, Normal, Medium
and Low. It is possible to DISABLE the optical and the temperature part.
2. Call Points
• MAGPRO-CP
- Call point with built-in isolator.
3. Modules
• MAGPRO-0i4O
- 4 outputs module with built-in isolator.
• MAGPRO-2i2O
- 2 inputs/ 2 outputs module with built-in isolator.
• MAGPRO-4i0O
- 4 Inputs module with built-in isolator.
• MAGPRO-CZM
- Conventional zone module with built-in isolator.
• MAGPRO-MINI
- Mini input module - the operation is programmed according the type of the devices connected
to the input with built-in isolator.
• MAGPRO-1OSi
- Conventional sounders module with built-in isolator.
• MAGPRO-R
- Mains switch module with built-in isolator.
4. Sounders
• MAGPRO-WS
- Wall mounted sounder
• MAGPRO-WSS
- Wall mounted sounder and strobe
• MAGPRO-DbS
- Base with built-in sounder
• MAGPRO-DbSS
- Base with built-in sounder and strobe
