26
Addressable Fire Panel MAGPRO96
- Installation and Programming Manual
MAGPRO-SD1 - Optical-smoke detector
Fig. Screen 9(a) - MAGPRO-SD1 fire detector.
On Fig. Screen 9(a) is shown the MAGPRO-SD1 (addressable optical smoke detector) settings screen. Choose the
“MORE” button to enter a screen with additional settings:
•
Smoke (%)/ Heat (
°
C)
- Press the “Check” button to enter in a new screen to review the following parameters:
- Smoke: Shows in percent the current level of smoke in the detector’s smoke chamber
- Pollution: Shows in percent the current level of pollution in the detector’s smoke chamber.
•
Led blink
- Button for changing the LED mode: ON Setting - The LED blinks at every query from the station; OFF
Setting - The LED does not show the dialogue cycle.
•
Day Alarm Level*
- Setting the day alarm level.
•
Night Alarm Level*
- Setting the night alarm level.
* NOTE: There are 4 levels for setting of alarm level sensitivity: High, Normal, Middle and Low. To change the level of
sensitivity simple press the active button next to the field and choose a new level from the list.
To save the new setting press the “Apply” button on the main screen of the device.
MAGPRO-HD1 - Heat detector
Fig. Screen 9(b) - MAGPRO-HD1 fire detector.
On Fig. Screen 9(b) is shown the MAGPRO-HD1 (addressable temperature detector) settings screen. Choose the
“MORE” button to enter a screen with additional settings:
•
Smoke (%)/ Heat (
°
C)
- Press the button to enter in a new screen for checking of the following current parameters:
- T fire – Shows the operating temperature of the detector, in degrees centigrade.
- Т – Shows the current temperature in the room, in degrees centigrade.
