56
Addressable Fire Panel MAGPRO96
- Installation and Programming Manual
4.10.2 brightness Calibration
The Installer/User can also adjust the brightness of the LCD touch screen display. To see the brightness of the display
choose the
Colours
submenu from the
Display Menu
.
To adjust the LCD brightness use a small plain screw-driver and turn the potentiometer on the left or on the right.
4.10.3 Power Save backlight
The Installer/User can switch on a backlight save mode as choose the
Power Save Backlight
button from the
Display
Menu
.
LCD Power Down Mode
Fig. Screen 40.
Use the
APPLY
button to confirm you choice. If the Backlight Save Mode is Enabled the LCD Backlight will switch off
after 60 sec when the LCD Touch screen display is not used. You you can switch on the backlight by simple pressing
the touch screen.
4.11 View Insulator Active
This is an information menu for reviewing the active insulators. To access this menu choose in sequence SYSTEM-
MAINTENANCE-VIEW INSULATOR ACTIVE - Fig. Screen 41. The active insulator in the system are displayed as de
-
vice addresses in the field “Address” for MAGPRO96-L250 loops.
Fig. Screen 41.
