18
Addressable Fire Panel MAGPRO96
- Installation and Programming Manual
3. PROGRAMMING
3.0
Basic knowledge for operating with LCD touch-screen display
The touch-screen display of the fire panel MAGPRO96 provides easy moving down the programming menus and
entering of system parameters. The access to the programming menus is done with light pressing of the desired button.
You can use also and a special pen for touch-screen display.
According to the chosen menu and/or the access level there are active and inactive buttons on the screen. Choosing
an active button leads to changing of the screen - you can move to a list of additional or submenus for programming, or
you can enter new parameters in the system.
3.0.1 Terminology
•
Active Button
- Pressing the button you can perform
different operations: stop the sirens, reset the system
parameters or move to other programming menus.
• Inactive Buttons
- The buttons do not respond when
pressed. The parameters definition fields are also inactive.
They just provide information of the parameter type.
Note:
The status of the buttons can alternatively change
(active-inactive) according the programming menu and
access level.
• Panel Status Icons
- The icons give information about
the status of the fire panel and the programmed working
mode. The icons are inactive if pressed. The different fire
panel states are indicated with different colour of the icon.
The icons and their state are described in item 5.2.
• Used symbols
-
Press the pointed button
- Use a special pen for touch-screen display.
3.0.2 Initial Power-up
When turned on, the panel always conducts a procedure of loading the parameters, which usually takes about 30 sec.
There is no access to the menus of the panel during that procedure.
Upon the initial start up, the panel does not hold any configurations. Initialization may take several minutes. The initiali
-
zation time needed depends on the number of periphery and loop devices. After the panel has been turned on, it per
-
forms a procedure for detecting newly installed periphery and loop devices - see also The
APPENDIX E
on page 57.
3.0.3 Default Language
The fire panel MAGPRO96 can support different languages of the programming menus. The factory default setting of
the language is in English. You can change the language after the initial power-up as enter in sequence:
Access 1 → 3333 → OK → System → Programming → Panel → Languages →
→
Choose a language → Apply
After choosing the
Apply
button,
you can return to the main screen by choosing the
MENU
button.
Date and time
information
Panel Status Icons
Active
Buttons
Inactive
Buttons
