17
Kongsberg XP
The
TakeUp Unit
is activated.
The machine starts processing.
It stops when the dancer roller is in neutral position, the power button is switched
off or when the emergency stop is activated.
Attention:
The
TakeUp Unit
does not stop automaticly when the waste roll is full.
This has to be done manually by switching off the power button or by activating
the emergency stop button.
17.8. Using the Autogrip Shaft
Put the core/media roll central on the autogrip
shaft, which uses rubber blocking cords to grip
with.
Rotate the core/media roll to engage it with the
autogrip-shaft.
Note:
If a core/media roll of the same size is often
used; install a roll clamp at one side of the shaft,
to enable easy replacement.
Autogrip shaft installation
The shaft is hung in a special T-slot on one side of
the machine and a suspension point on the other
side.
The suspension points on both sides of the
TakeUp Unit
are provided with a locking ring to
prevent the Autogrip shaft from falling out.
The locking ring has to be turned manually to
locked or unlocked position.
T-slot of
TakeUp Unit
203
