5
Kongsberg XP
Knife blades
and
milling bits
are extremely sharp.
This symbol is used
in documentation
to indicate operations where there is risk of
being injured.
Additional warning signs are found in relevant sections.
5.6. Attention areas
5.6.1. Mains power disconnection
The main power switch on the
operator station
is intended for daily power on/off
To permanently disconnect mains power, e.g. for maintenance, use a lockable on/off switch at the
power line if available, or remove the plug from the wall outlet. In addition, turn off the main power
switch.
Note: A lockable on/off switch on the power line may be required by local regulations, but is part of
the site preparation, site owner’s responsibility, not included in the Kongsberg system delivery unless
agreed.
5.6.2. High voltage, laser radiation and moving parts
20