12
Kongsberg XP
• Width Offset limitations: -50 mm < Width Offset < +10 mm / -2 in < Width Offset < +0.4 in.
• Decide if
Waste
Cut
function is needed, mostly needed for corrugated plastics.
This illustration shows how the parameter dW is used to ensure a nice folding result.
Waste Cut
function, adjustment
This illustration shows a typical use of
Waste Cut
function.
The middle wall is not cut by (2) or (3), making the
material impossible to fold.
The
Waste Cut
function (1) cut the middle wall and
you can fold the material nicely.
Negative and positive adjustment direction vs. cut
direction
12.6.3. HD Knife Tool
Description
The
HD Knife Tool
mounted on
HDU
.
85
