12
Kongsberg XP
Note:
V-notch Knife Adapters
are available for different
knife angles: 15
o
, 22.5
o
, 30
o
, 45
o
, 47.5
o
. There
is also a
VariAngle unit
available for cutting any
angle from 0 to 60
o
.
In this chapter, a 45
o
knife angle is discussed.
The programming and operation will be similar for
other angles.
V-notch specific parameters
Rotational compensation
Rotational compensation is used to optimize
V-notch
/
Bevel Cut
quality in challenging materials and
use cases. This feature will pre-load the knife blade and overcome mechanical flexibility in the system.
Notch angle
Notch Angle is used for the
VariAngle unit
only, and determines the angle of the blade into the material.
0
o
is a vertical cut. For
V-notch knifes
, angle is determined by type of
V-notch knife
mounted.
V-notch Cut
Performs a single angled cut
83
