12
Kongsberg XP
The
Measuring Station
eliminates the manual
adjustment of tool height.
The
Measuring Station
covers the following
functions:
• Calibrates the
Measuring Foot
.
• Automatically measures the height of the tool
tip.
If you, for any reason, would like to add an
adjustment value to the measured value, a height
adjustment dialog is available from the
Tool
Configuration
menu.
The
Measuring Sequence
is carried out as follows:
• During the first
Table Zero Sequence
after
Power On
.
• After any
Tool
change and the
Tool
is not calibrated.
• After the
Safety System
has been broken for 30 sec. or more.
• After the
Servo System
has been off for 30 sec. or more.
• During the
Table Zero Sequence
if
Incremental Jog
is selected.
Tool Depth and Measuring Station
Be aware how the
Measuring Station
is working; it
is the tool tip that is measured.
Depending upon the actual tool, it might be
necessary to add depth in order to achieve cut or
drill through the material.
Additional depth is entered in two ways:
• The general depth of a
Tool
is entered from
Machine Connection
->
Tool configuration
-
>
Adjust Active Tool
->
Tool Height Calibration
.
• The
Job
specific depth is entered from
Opened Job
->
Edit Layer
77
