12
Kongsberg XP
Material crushing depends upon two
adjustments:
A - Knife tip exposed
Adjust until the distance d is 1.0
mm/0.04 in. less than material
thickness.
One turn (CW) on A increase d with 1
mm/0.04 in.
B - Foot pressure
Adjust foot pressure.
C - scale indicating actual pressure.
For optimal performance, the foot pressure must be adapted to each material.
Run some test cuts to find the best combination of knife tip exposure and foot pressure.
Start with foot pressure = 5 and test with different knife tip exposures.
By this, you can find and save settings that are optimal for each type of material.
Note
When adjusting the knife tip exposure, do not
adjust the knife tip too far into the foot.
The limit is when the knife tip is flush with the
front edge of the foot,
or the inner sleeve is flush with the outer sleeve.
Insert Knife Blade
160