11
Kongsberg XP
This table shows correct position for the different tools.
The tool configuration; the tools available depends upon the actual delivery.
Notes:
(1): An optional Tool Insert Position is required for these tools.
(2): These units are permanently fixed to the P1 tool position.
The Fast Tool Adapter makes it possible to attach
tools intended for P2 into P1.
Note
:
HF-Vibra Cut Knife Tool fits in P1 as well as P2, but
the Fast Tool Adapter shall
not
be used.
PressCut tool can
not
be used with the Fast Tool
Adapter (fits in P2 only).
11.2.
Tool Names
Factory Tool Name
The
Tool Type
mounted is identified by hardware codes inside each tool.
The identified tool is called
Factory Tool Name
The mounted tools are maintained by:
Machine Connection
->
Tool Configuration
Current tool configuration is displayed under
Identified tools
.
When a new tool is inserted, it will be identified to the system automatically.
By default the system creates a username from the tool type and its serial number. E. g. a knife with
serial number 3020 will be named
Knife 20
User Tool Name
Menu Bar
->
Advanced
->
Configure Tools
From this dialog, you can give each tool a nickname.
66
