PPPoA CLI Commands
434
2/1553-ZAT 759 94 Uen B – December 2005
16.42
pppoa set transport theylogin
16.42.1 Syntax
pppoa set transport {<name>|<number>} theylogin
{none|pap|chap}
16.42.2 Description
This command sets the authentication method that remote PPP clients must
use to dialin to the server. If authentication is used, clients must use the
specified authentication method and provide the username set using the
system add user command.
This command is only valid if the user has
maydialin
set using the
system
set login maydialin
command.
16.42.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
PPPoA transport. To display transport
names, use the
pppoa list
transports
command.
N/A
number
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the
pppoa list
transports
command.
N/A
none
No authentication method is set.
pap
Password Authentication Protocol; the
server sends an authentication
request to the remote user dialing in.
PAP passes the unencrypted
username and password and identifies
the remote end.
None
