The nozzle pattern prints.
8.
Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
9.
Do one of the following:
• If there are no gaps, select
Done
.
• If there are gaps or the pattern is faint, select
Clean the Print Head
and continue.
10. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
Caution:
Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product, if
possible, and wait at least 6 hours. Then try cleaning the print head again. If quality still does not
improve, one of the ink cartridges may be old or damaged and needs to be replaced.
Parent topic:
Print Head Nozzle Check
Related concepts
Print Head Cleaning
Related topics
Loading Paper
331
Summary of Contents for WF-8590
