Introduction
7
❏
If you use an extension cord with this product, make sure the total ampere rating of the
devices plugged into the extension cord does not exceed the cord’s ampere rating.
Also, make sure the total ampere rating of all devices plugged into the wall outlet does
not exceed the wall outlet’s ampere rating.
❏
If damage occurs to the plug, replace the cord set or consult a qualified electrician. If
there are fuses in the plug, make sure you replace them with fuses of the correct size
and rating.
When using this product
❏
Do not block or cover the openings in this product’s case
❏
Do not insert objects through the slots. Take care not to spill liquid on this product.
❏
Do not attempt to service this product yourself.
❏
Unplug this product and refer servicing to qualified service personnel under the
following conditions: The power cord or plug is damaged; liquid has entered the
product; the product has been dropped or the cabinet damaged; the product does not
operate normally or exhibits a distinct change in performance.
❏
Do not move the print head by hand; otherwise you may damage this product.
❏
Always turn the product off using the
P
power button on the control panel. When this
button is pressed, the
P
power light flashes briefly then goes off. Do not unplug the
power cord or turn off the product until the
P
power light stops flashing.
❏
This device has two power systems. There is a risk of electric shock unless the two
power cables are unplugged during maintenance.
When handling the ink packs
❏
Keep ink packs out of the reach of children and do not drink the ink.
❏
Wear protective eyewear and gloves when refilling ink tanks or replacing the waste ink
bottle.
Should ink contact your skin or enter your eyes or mouth, immediately take the
following actions:
❏
If fluid adheres to your skin, immediately wash it off using large volumes of soapy
water. Consult a physician if the skin appears irritated or is discolored.
