Basic Operations
67
3. After entering the name, press the
Z
button.
Feed Adjustment (manual)
Feed Adjustment
is used to correct banding (horizontal banding, lines, or strips of uneven
color).
You need to visually inspect prints and enter a correction by hand.
For more information on feed adjustment, see “Feed Adjustment” on page 76.
Platen Gap
Adjust the platen gap (the gap between the print head and the media) if prints are
smudged.
1. Use the
d
/
u
buttons to select
Platen Gap
and press the
Z
button.
2. Use the
d
/
u
buttons to select the desired setting and press the
Z
button.
3. Press the
y
button to return to the customize settings menu.
Head Alignment (manual)
Select
Head Alignment
to correct print head misalignment when prints seem grainy or out
of focus.
You need to check the pattern and enter the optimum adjustment value for alignment.
For more information on manual head alignment, see “Correcting Print Misalignment
(Head Alignment)” on page 73.
Important:
Select
2.5
only if prints are still smudged when
2.0
is selected. Choosing a larger gap than
required may result in ink stains inside the printer, reduced print quality, or shorter product life.
