Basic Operations
34
If the label does not have a loading position, mark it on the label as instructed in the
Setup Guide
.
5. Raise the roll holder lever on the left side of the printer to lift the media into position,
then firmly insert the roll holder.
If the roll of media has an outer diameter which is less than 140 mm (5.5 inches), lift it
up by your hands, and place it on the roll holder. The roll core will not reach the holder
when raised using the roll holder lever.
6. Tighten the roll holder screw to fix the roll holder in place.
Note:
Be sure the option selected for
Roll Type
in the
Customize Settings
menu matches how
the media is rolled.
Roll Type
defaults to
Printable Side Out
. Be sure to select
Printable
Side In
after loading media rolled printable side in.
For more information see “Roll Type” on page 70.
