Basic Operations
58
Take-Up With the Printed Side Facing In
1. Pass the media under the media guide bar, and then attach the media to the take-up
roll core.
In the order shown in the illustration, tape the media to the take-up roll core. When
attaching in the center, tape while pulling the center of the media straight. When
attaching on the left and right, tape while pulling the media sideways.
2. Press the
d
button in the control panel to feed enough media for a single wrap around
the roll core.
Important:
If the media is lifted up between the attached pieces of tape, the media will not be taken up
correctly. We recommend either adding tape and attaching it uniformly or fixing creases at
the leading edge of the media.
