IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12-72
Matrix NSA Series Configuration Guide
•
(Optional) Allow specific clients direct access
to a real server without using LSNAT.
allow accessservers (
Section 12.2.8.19
)
Configure global direct access:
•
(Optional) Allow all clients to directly access all
services provided by real servers EXCEPT FOR
those services configured to be accessed
through a configured virtual server. (See
“Configuring Direct Access to Real Servers”
on
page 12-69 for more information.)
ip slb allowaccess_all (
Section 12.2.8.20
)
Display or clear server load balancing connections and statistics:
•
(Optional) Display server load balancing
connections and statistics.
show ip slb conns (
Section 12.2.8.21
)
show ip slb stats (
Section 12.2.8.22
)
•
(Optional) Display SLB active sticky
persistence connections.
show ip slb sticky (
Section 12.2.8.23
)
•
(Optional) Clear server load balancing
connections or statistics.
clear ip slb (
Section 12.2.8.24
)
Display and set chassis-based LSNAT limits:
(Optional) From the switch CLI, display and set
chassis-based LSNAT address translation limits.
NOTE:
These commands must be
executed from the switch CLI.
show router limits (
Section 12.2.8.25
)
set router limits (
Section 12.2.8.26
)
clear router limits (
Section 12.2.8.27
)
Table 12-8
LSNAT Configuration Task List and Commands (Continued)
Task
Use these commands...