Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-56
Matrix NSA Series Configuration Guide
3.2.4.19
clear lldp
Use this command to return LLDP parameters to their default values.
clear lldp
{
all
|
tx-interval
|
hold-multipler
|
trap-interval
|
med-fast-repeat
}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example returns the transmit interval to the default value of 30 seconds.
all
Return
all
LLDP configuration parameters to their default
values, including port LLDP configuration parameters.
tx-interval
Return the number of seconds between transmissions of
LLDP frames.to the default of 30 seconds.
hold-multiplier
Return the multiplier to apply to the transmit interval to
determine the time-to-live value to the default value of 4.
trap-interval
Return the minimum time between LLSP trap
transmissions to the default value of 5 seconds.
med-fast-repeat
Return the number of fast start LLDPDUs to be sent when
an LLDP-MED endpoint device is detected to the default
of 3.
Matrix(rw)->clear lldp tx-interval