Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
11-112
Matrix NSA Series Configuration Guide
11.2.5.11 show mac
Use this command to display the timeout period for aging learned MAC addresses, and to show
MAC addresses in the switch’s filtering database. These are addresses learned on a port through the
switching process or statically entered. To show port MAC addresses programmed into the device
during manufacturing, use the
show port mac
command as described in
Section 11.2.5.10
.
show mac
[
agetime
] [
address mac
-
address
] [
fid fid
] [
vlan-id
vlan-id
]
[
port-string
port-string
] [
type
{
other
|
invalid
|
learned
|
self
|
mgmt
}]
[
field-decode
] [
-verbose
]
Syntax Description
Command Defaults
If no parameters are specified, all MAC addresses for the device will be displayed.
Command Mode
Read-Only.
agetime
(Optional) Display the time in seconds that a learned MAC
address will stay in the filtering database.
address
mac-address
(Optional) Displays a specific MAC address (if it is known
by the device).
fid fid
(Optional) Displays MAC addresses for a specific filter
database identifier.
vlan-id
vlan-id
(Optional) Displays MAC addresses for a specific VLAN
based on the VLAN ID,
for static multicast entries only.
port-string
port-string
(Optional) Displays MAC addresses for a specific port or
range of ports. For a detailed description of possible
port-string
values, refer to
Section 4.1.1
.
type
other
|
invalid
|
learned
|
self
|
mgmt
(Optional) Display MAC addresses defined as
other
,
invalid
,
learned
,
self
or
mgmt
(management).
field-decode
(Optional) Display the meanings of the fields in the
show
mac
command.
-verbose
(Optional) Displays all MAC address information in detail.