Security Configuration Command Set
Configuring
Matrix NSA Series Configuration Guide
14-35
14.3.4.9
show tacacs command
Use this command to display the status (enabled or disabled) of accounting or
authorization on a per-command basis.
show tacacs command
{
accounting
|
authorization
} [
state
]
Syntax Description
Command Defaults
If
state
is not specified, all accounting or authorization configuration parameters
are displayed (which at this time includes only the enabled/disabled status).
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to display the state of the client’s command authorization.
accounting
Display the status of accounting on a
per-command basis.
authorization
Display the status of authorization on a
per-command basis.
state
(Optional) Specifies that only the status should be
displayed.
Matrix(rw)->
show tacacs command authorization
command authorization state: enabled