Port Configuration Command Set
Setting Speed and Duplex Mode
Matrix NSA Series Configuration Guide
4-43
4.3.4.2
set port speed
Use this command to set the default speed of one or more ports. This setting only takes effect on
ports that have auto-negotiation disabled.
set port speed port-string
{
10
|
100
|
1000
}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet port 3 in port group 3 to a port speed of 10 Mbps:
port-string
Specifies the port(s) for which to a speed value will be
set. For a detailed description of possible
port-string
values, refer to
Section 4.1.1
.
10
|
100
|
1000
Specifies the port speed. Valid values are:
10
Mbps,
100
Mbps, or
1000
Mbps.
Matrix(rw)->
set port speed fe.3.3 10