manualshive.com logo in svg

Enterasys Matrix N Standalone Series, Configuration Manual, Page: 621 / 1372

Share
Download
Enterasys Matrix N Standalone Series Configuration Manual Download Page 621

Policy Classification Configuration Command Set

Configuring Policy Profiles

Matrix NSA Series Configuration Guide

8-5

Table 8-1

 provides an explanation of the command output.

Table 8-1

show policy profile Output Details

Output

What It Displays...

Profile Index

Number of the prolicy profile.

Profile Name 

User-supplied name assigned to this policy profile.

Row Status

Whether or not the policy profile is enabled (

active

) or 

disabled.

Port VID Status 

Whether or not PVID override is 

enabled

 or 

disabled 

for 

this policy profile. If all the classification rules associated 
with this profile are missed, then this parameter, if 
specified, determines default behavior.

Port VID Override The PVID to assign to packets, if PVID override is enabled.

CoS Status

Whether or not Class of Service override is 

enabled

 or 

disabled 

for this profile. If all the classification rules 

associated with this profile are missed, then this parameter, 
if specified, determines default behavior.

CoS

 The CoS priority value to assign to packets, if CoS 
override is enabled.

Tagged Egress 
VLAN List

VLAN(s) that ports to which the policy profile is assigned 
can use for tagged egress.

Forbidden VLAN 
List

VLAN(s) forbidden to ports to which the policy profile is 
assigned.

Untagged VLAN 
List

VLAN(s) that ports to which the policy profile is assigned 
can use for untagged egress.

Replace TCI 
status

Whether or not the TCI overwrite function is enabled or 
disabled for this profile.

Admin Profile 
Usage

Ports administratively assigned to use this policy profile.

Oper Profile 
Usage

Ports currently assigned to use this policy profile.

Dynamic Profile 
Usage

Port dynamically assigned to use this policy profile.

Summary of Contents for Matrix N Standalone Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments