General Configuration Command Set
Setting Basic Device Properties
2-76
Matrix NSA Series Configuration Guide
2.2.3.27
set system location
Use this command to identify the location of the system.
set system location
[
string
]
Syntax Description
Command Defaults
If
string
is not specified, the location name will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system location string:
string
(Optional) Specifies a text string that indicates where
the system is located.
NOTE:
A location string containing a space in
the text must be enclosed in quotes as shown
in the example below.
Matrix(rw)->
set system location “Bldg N32-04 Closet 9”