IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix NSA Series Configuration Guide
12-71
•
(Optional) Specify a load balancing algorithm.
predictor (
Section 12.2.8.5
)
•
(Optional) Configure this server farm to use
sticky session persistence. (See
“Sticky
Persistence Configuration Considerations”
on
page 12-69 for more information.)
sticky (
Section 12.2.8.6
)
Configure a real server:
•
(Optional) Display the real server configuration.
show ip slb reals (
Section 12.2.8.7
)
•
Enable a real server for service.
inservice (
Section 12.2.8.8
)
•
(Optional) Configure real server error handling.
faildetect (
Section 12.2.8.9
)
•
(Optional) Limit active connections to the real
server.
maxconns (
Section 12.2.8.10
)
•
(Optional) Specify a weight load number for the
real server.
weight (
Section 12.2.8.11
)
Configure a virtual server:
•
(Optional) Display the virtual server
configuration.
show ip slb vservers (
Section 12.2.8.12
)
•
Specify a virtual server name.
ip slb vserver (
Section 12.2.8.13
)
•
Associate a virtual server with a server farm.
serverfarm (
Section 12.2.8.14
)
•
Configure a virtual server IP address (VIP).
virtual (
Section 12.2.8.15
)
•
Enable a virtual server for service.
inservice (
Section 12.2.8.16
)
•
(Optional) Restrict access to specific virtual
server clients.
client (
Section 12.2.8.17
)
•
(Optional) Specify the type of session
persistence and timeout. Default is TCP. (See
“Session Persistence”
on page 12-68 for more
information.)
persistence level (
Section 12.2.8.18
)
Table 12-8
LSNAT Configuration Task List and Commands (Continued)
Task
Use these commands...