Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-192
Matrix NSA Series Configuration Guide
14.3.15.3 set flowlimit limit
Use this command to set a flow limit that will trigger an action for a port user classification. Once
configured, this limit can be:
•
associated with an action using the
set flowlimit action
command as described in
Section 14.3.15.5
.
•
assigned to one or more ports using the
set flowlimit class
command as described in
Section 14.3.15.8
.
set flowlimit
{
limit1
|
limit2
limit
} [
userport
|
serverport
|
aggregateduser
|
interswitchlink
|
unspecified
]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If classification port type is not specified, none will be applied.
limit1
|
limit2
Specifies this configuration as limit 1 or 2. Two limits
assigned to two actions (describing what will occur when a
certain flow limit is reached) can be defined per user
classification.
limit
Specifies the number of flows that will trigger the
associated action configuration. Valid values are
0
-
4294967295
.
userport
|
serverport
|
aggregateduser
|
interswitchlink
|
unspecified
(Optional) Assigns this limit configuration to the user
classification port type:
•
user port
•
server port
•
aggregation port
•
inter-switch link
•
unspecified port