manualshive.com logo in svg

Enterasys Matrix N Standalone Series, Configuration Manual, Page: 225 / 1372

Share
Download
Enterasys Matrix N Standalone Series Configuration Manual Download Page 225

Discovery Protocols Command Set

Link Layer Discovery Protocol and LLDP-MED

Matrix NSA Series Configuration Guide

3-53

3.2.4.18

set lldp port network-policy

Use this command to configure network policy for a set of applications on a port or range of ports. 
The policies configured with this command are sent in LLDPDUs as LLDP-MED Network Policy 
TLVs. Multiple Network Policy TLVs can be sent in a single LLDPDU.

s

et lldp port network-policy

 {

all

 | 

voice

 | 

voice-signaling

 | 

guest-voice

 | 

guest-voice-signaling

 | 

softphone-voice

 | 

video-conferencing

 | 

streaming-video

 

| 

video-signaling

} [

state

 {

enable

 | 

disable

}] [ 

tag

 {

tagged

 | 

untagged

}] 

[

vid

 {

vlan-id

 | 

dot1p

}] [

cos

 

cos-value

] [

dscp

 

dscp-value

] 

port-string

Syntax Description

all

Configure all applications.

voice

Configure the voice application.

voice-signaling

Configure the voice signaling application. 

This application will not be advertised if the 

voice

 

application is configured with the same parameters.

guest-voice

Configure the guest voice application. 

guest-voice-signaling

Configure the guest voice signaling application. 

This application will not be advertised if the 

guest-voice

 

application is configured with the same parameters.

softphone-voice

Configure the softphone voice application.

video-conferencing

Configure the video conferencing application.

streaming-video

Configure the streaming video application.

video-signaling

Configure the video signaling application. 

This application will not be advertised if the 

video-conferencing

 application is configured with the 

same parameters.

state enable | disable

(Optional) Enable or disable advertising the application 
information being configured.

tag tagged | untagged

(Optional) Indicates whether the application being 
configured is using a tagged or untagged VLAN. If 
untagged, both the VLAN ID and the CoS priority fields 
are ignored and only the DSCP value has relevance.

Summary of Contents for Matrix N Standalone Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments