Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix NSA Series Configuration Guide
8-57
8.3.3.8
set cos port-config txq
Use this command to set the Class of Service transmit queue port group configuration:
set cos port-config txq
group-type-index
[
name
name
] [
ports
port-list
] [
append
]
| [
clear
]
Syntax Description
Command Defaults
•
If a
name
is not specified, default names described in
Table 8-5
will be applied.
•
If not specified, this configuration will be applied to all ports in the port group.
•
If
append
or
clear
are not specified, port(s) will be appended to the specified
port grouping.
•
If
arb-slice
or
arb-percentage
values are not specified, default allocations will
be applied.
Command Type
Switch command.
Command Mode
Read-Write.
group-type-index
Specifies a transmit queue port group/type index for this
entry. Valid entries are in the form of
group.type
. Group
can be 0-7, with 0 designating the default group, and 1-7
reserved for user-defined groups. Default port type values
cannot be changed, and are 0 for the Matrix
DFE-Platinum 7G4270-12 module, and 1 for all other
modules.
name name
(Optional) Specifies a name for this configuration.
ports port-list
(Optional) Applies this configuration to one or more ports
in the port group.
append
|
clear
(Optional) Appends or clears port designations from a
previously configured port group.