IP Configuration Command Set
Performing a Basic Router Configuration
12-18
Matrix NSA Series Configuration Guide
12.2.3.3
Configuring the Router
You can configure the router using either of the following methods.
Using a downloaded file...
1.
Download a router config file to the standalone or chassis using the
copy
command as described
in
Section 2.2.8.5
.
2.
Run the
configure
command using the downloaded config file as described in
Section 2.2.8.4
.
Creating and saving a custom file...
1.
Configure a module for routing using the
set router
command as described in
Section 2.3.2.2
.
2.
Enable the router as described in
Section 2.3.3
and configure it manually. (Refer back to
Figure 12-1
for an example of a basic config file.)
3.
Save the configuration using the
write file
command as described in
Section 12.2.2.2
.