IP Configuration Command Set
Configuring Dynamic Host Configuration Protocol (DHCP)
12-112
Matrix NSA Series Configuration Guide
Commands
The commands used to configure DHCP are listed below and described in the associated section as
shown:
•
ip dhcp server (
Section 12.2.9.1
)
•
ip local pool (
Section 12.2.9.2
)
•
exclude (
Section 12.2.9.3
)
•
ip dhcp ping packets (
Section 12.2.9.4
)
•
ip dhcp ping timeout (
Section 12.2.9.5
)
•
ip dhcp pool (
Section 12.2.9.6
)
•
domain-name (
Section 12.2.9.7
)
•
dns-server (
Section 12.2.9.8
)
•
netbios-name-server (
Section 12.2.9.9
)
•
netbios-node-type (
Section 12.2.9.10
)
•
default-router (
Section 12.2.9.11
)
•
bootfile (
Section 12.2.9.12
)
•
next-server (
Section 12.2.9.13
)
•
option (
Section 12.2.9.14
)
•
lease (
Section 12.2.9.15
)
•
host (
Section 12.2.9.16
)
DHCP Host
Configuration
Mode
Configure DHCP
host parameters.
Type
client-identifier
and
the
identifier
, or
hardware-address
and an
address
from
any DHCP
configuration mode.
Matrix>Router1
(config-dhcp-host)#
Table 12-12
DHCP Command Modes (Continued)
Mode
Usage
Access Method
Resulting Prompt