Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
Matrix DFE-Platinum and Diamond Series Configuration Guide
11-111
11.2.5.10 show port mac
Use this command to display the MAC address(es) for one or more ports. These are port MAC
addresses programmed into the device during manufacturing. To show the MAC addresses learned
on a port through the switching process, use the
show mac
command as described in
Section 11.2.5.11
.
show port mac
[
port-string
]
Syntax Description
Command Defaults
If
port-string
is not
specified, MAC addresses for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display the MAC address for 1-Gigabit Ethernet port 4 in module 2:
port-string
(Optional) Displays MAC addresses for specific port(s).
For a detailed description of possible
port-string
values,
refer to
Section 4.1.1
.
Matrix(rw)->
show port mac fe.2.4
Port MAC Address
------------ ----------------------
fe.2.4 00-01-F4-DA-32-FE