Security Configuration Command Set
Configuring 802.1X Authentication
Matrix DFE-Platinum and Diamond Series Configuration Guide
14-49
14.3.5.5
clear dot1x auth-config
Use this command to reset 802.1X authentication parameters to default values on one or more ports.
clear dot1x
auth-config
[
authcontrolled-portcontrol
] [
keytxenabled
] [
maxreq
]
[
quietperiod
] [
reauthenabled
] [
reauthperiod
] [
servertimeout
] [
supptimeout
]
[
txperiod
] [
port-string
]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
•
If no parameters are specified, all authentication parameters will be reset.
authcontrolled-
portcontrol
(Optional) Resets the 802.1X port control mode to
auto
.
keytxenabled
(Optional) Resets the 802.1X key transmission state to
disabled (
false
).
maxreq
(Optional) Resets the maximum requests value to
2
.
quietperiod
(Optional) Resets the quiet period value to
60
seconds.
reauthenabled
(Optional) Resets the reauthentication control state to
disabled (
false
).
reauthperiod
(Optional) Resets the reauthentication period value to 3
600
seconds.
servertimeout
(Optional) Resets the server timeout value to
30
seconds.
supptimeout
(Optional) Resets the authentication supplicant timeout
value to
30
seconds.
txperiod
(Optional) Resets the transmission period value to
30
seconds.
port-string
(Optional) Resets settings on specific port(s). For a
detailed description of possible
port-string
values, refer to
Section 4.1.1
.