Port Configuration Command Set
Configuring Link Traps and Link Flap Detection
Matrix DFE-Platinum and Diamond Series Configuration Guide
4-75
4.3.8.5
set linkflap
Use this command to enable or disable link flap monitoring on one or more ports.
set linkflap portstate
{
disable
|
enable
} [
port-string
]
Syntax Description
Command Defaults
If
port-string
is not specified, all ports will be disabled or enabled.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the link trap monitoring on all ports:
disable
|
enable
Disables or enables the link flap detection function.
port-string
(Optional) Specifies the port(s) on which to disable or
enable monitoring. For a detailed description of possible
port-string
values, refer to
Section 4.1.1
.
Matrix(rw)->
set linkflap portstate enable