Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide
6-27
6.2.1.15
set spantree mstmap
Use this command to map one or more filtering database IDs (FIDs) to a SID. Since VLANs are
mapped to FIDs, this essentially maps one or more VLAN IDs to a Spanning Tree (SID).
set spantree mstmap fid
[
sid sid
]
Syntax Description
Command Defaults
If
sid
is not specified, FID(s) will be mapped to Spanning Tree 0.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to map FID 3 to SID 2:
fid
Specifies one or more FIDs to assign to the MST. Valid
values are
1
-
4093
, and must correspond to a VLAN ID
created using the
set vlan
command as described in
Section 7.3.2.1.
sid sid
(Optional) Specifies a Multiple Spanning Tree ID. Valid
values are
1
-
4094
, and must correspond to a SID created
using the
set msti
command as described in
Section 6.2.1.12
.
Matrix(rw)->
set spantree mstmap 3 sid 2