Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide
6-31
6.2.1.19
set spantree mstcfgid
Use this command to set the MST configuration name and/or revision level.
set spantree mstcfgid
{
cfgname name
|
rev level
}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the MST configuration name to “mstconfig”:
cfgname name
Specifies an MST configuration name.
rev level
Specifies an MST revision level. Valid values are
0
-
65535
.
Matrix(rw)->
set spantree mstconfigid cfgname mstconfig