Port Priority and Rate Limiting Configuration Command Set
Configuring Quality of Service (QoS)
Matrix DFE-Platinum and Diamond Series Configuration Guide
9-13
9.3.3.2
set port txq
Use this command to set QoS transmit queue arbitration values.
set port txq port-string
{[
value0 [value1
]
[
value2
] [
value3
]
[
value4
] [
value5
]
[
value6
] [
value7
] [
value8
] [
value9
] [
value10
] [
value11
] [
value12
] [
value13
]
[
value14
] [
value15
]}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to change the arbitration values for the four transmit queues belonging to
fe.2.1:
port-string
Specifies port(s) on which to set queue arbitration values.
For a detailed description of possible
port-string
values,
refer to
Section 4.1.1
.
value0 - value15
Specifies percentage to allocate to a specific transmit
queue.
NOTE:
The total percentage of transmit queue
values
must add up to 100%.
Matrix(rw)->
set port txq
fe.2.1 10 30 20 40