Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-68
Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.55
set spantree spanguard
Use this command to enable or disable the Spanning Tree span guard function. When enabled, this
prevents an unauthorized bridge from becoming part of the active Spanning Tree topology. It does
this by disabling a port that receives a BPDU when that port has been defined as an edge (user) port
(as described in
Section 6.2.2.20
). This port will remain disabled until the amount of time defined
by the
set spantree spanguardtimeout
(
Section 6.2.1.58
) has passed since the last seen BPDU or
the port is manually unlocked (as described in
Section 6.2.1.61
).
set spantree spanguard
{
enable
|
disable
}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the span guard function:
enable
|
disable
Enables or disables the span guard function.
Matrix(rw)->
set spantree spanguard enable