Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6-94
Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.2.2
set spantree portenable
Use this command to set the port status on one or more Spanning Tree ports.
set spantree portenable port-string
{
enable
|
disable
}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable Spanning Tree port fe.1.12:
port-string
Specifies the port(s) to enable or disable. For a detailed
description of possible
port-string
values, refer to
Section 4.1.1
.
enable
|
disable
Enables or disables the Spanning Tree port.
Matrix(rw)->
set spantree portenable fe.1.12 enable