Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-56
Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.43
set spantree legacypathcost
Use this command to enable or disable legacy (802.1D) path cost values.
set spantree legacypathcost
{
disable
|
enable
}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the default path cost values to 802.1D:
NOTE:
By default, legacy path cost is disabled. Enabling the device to calculate legacy
path costs affects the range of valid values that can be entered in the
set spantree
adminpathcost
command (
Section 6.2.2.17
).
disable
|
enable
Enables or disables legacy (802.1D) path cost values.
Matrix(rw)->
set spantree legacypathcost enable