Enterasys Matrix 2G4072-52, Configuration Manual, Page: 1358 / 1422

Security Configuration Command Set
Configuring Multiple Authentication
14-148 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.10.13 clear multiauth idle-timeout
Use this command to clear multiple authentication idle-timeout values, for an idle session, back to
the default values for one or all authentication types. The default value is 300 seconds for all types.
clear multiauth idle-timeout [ cep | dot1x | mac | pwa ]
Syntax Description
Command Defaults
If no authentication type is specified, the idle timeout value is returned to 300
seconds for all authentication types.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to clear the idle-timeout session values for cep and mac authentication
types, back to default value of 300 seconds:
This example shows how to clear the idle-timeout session values for all authentication types, back
to the default value of 300 seconds:
cep | dot1x | mac |
pwa
(Optional) Specifies the authentication type:
•
cep — Enterasys Convergence End Point Authentication
•
dot1x — IEEE 802.1X Port-Based Network Access
Control
•
mac — Enterasys MAC Authentication
•
pwa — Enterasys Port Web Authentication
Matrix(rw)-> clear multiauth idle-timeout cep
Matrix(rw)-> clear multiauth idle-timeout mac
Matrix(rw)-> set multiauth idle-timeout