Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-200
Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.15.8 set flowlimit port
Use this command to:
•
enable or disable flow limiting on one or more port(s),
•
assign a flow limiting user classification to one or more port(s). Once a classification is assigned,
these ports will be subject to the flow limit configured (with the
set flowlimit limit
command as
described in
Section 14.3.15.3
) and the action configured (with the
set flowlimit action
command as described in
Section 14.3.15.5
).
•
Enable an interface previously disabled by a flow limiting action.
set flowlimit port
{
enable
|
disable
} |
class
{
userport
|
serverport
|
aggregateduser
|
interswitchlink
|
unspecified
} |
status
{
operational
}
[
port-string
]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If
port-string
is not specified, settings will apply to all ports.
enable
|
disable
Enables or disables flow limiting on specified ports.
class userport
|
serverport
|
aggregateduser
|
interswitchlink
|
unspecified
Assigns a user classification type to the port(s) as:
•
user port
•
server port
•
aggregation port
•
interswitch link
•
unspecified port
status operational
Enables an interface previously disabled by a flow limiting
action.
port-string
(Optional) Specifies port(s) on which to configure flow
limiting parameters.