Port Configuration Command Set
Setting Console Port Properties
4-16
Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.1.10
set console bits
Use this command to set the number of bits per character for one or more console ports.
set console bits
num-bits
[
port-string
]
Syntax Description
Command Defaults
If
port-string
is not specified, bits per character will be set for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set bits per character to 5 for console port com.1.1:
num-bits
Specifies the number of bits per character. Valid values are
5
,
6
,
7
, and
8
.
port-string
(Optional) Sets bits per character for specific console port(s).
Matrix(rw)->
set console bits 5 com.1.1