Endress+Hauser Micropilot FMR50, Operating Instructions Manual

Page: 113 / 184

Micropilot FMR51, FMR52 HART Operating menu
Hauser 113
Present mapping
Navigation  Setup → Present mapping
Description Indicates up to which distance a mapping has already been recorded.
Mapping end point 
Navigation  Setup → Map. end point
Prerequisite Confirm distance (→  111) = Manual map or Distance too small
Description Specify new end of the mapping.
User entry 0.1 to 999 999.9 m
Factory setting 0.1 m
Additional information This parameter defines up to which distance the new mapping is to be recorded. The
distance is measured from the reference point, i.e. from the lower edge of the mounting
flange or the threaded connection.
For reference purposes the Present mapping parameter (→  113) is displayed
together with this parameter. It indicates up to which distance a mapping has already
been recorded.
Record map 
Navigation  Setup → Record map
Prerequisite Confirm distance (→  111) = Manual map or Distance too small
Description Start recording of the map.
Selection • No
• Record map
• Overlay map
• Factory map
• Delete partial map
Factory setting No