Endress+Hauser Micropilot FMR50, Operating Instructions Manual

Page: 174 / 184

Operating menu Micropilot FMR51, FMR52 HART
174 Hauser
Description of parameters
Navigation  Expert → Diagnostics → Simulation
Assign measurement variable 
Navigation  Expert → Diagnostics → Simulation → Assign meas.var.
Description Selct process variable to be simulated.
Selection • Off
• Level
• Level linearized
Factory setting Off
Additional information • The value of the variable to be simulated is defined in the Process variable value
parameter (→  174).
• If Assign measurement variable ≠ Off , a simulation is active. This is indicated by a
diagnotic message of the Function check (C) category.
Process variable value 
Navigation  Expert → Diagnostics → Simulation → Proc. var. value
Prerequisite Assign measurement variable (→  174) ≠ Off
Description Specify value of the process value being simulated.
User entry Signed floating-point number
Factory setting 0
Additional information Downstream measured value processing and the signal output use this simulation value. In
this way, users can verify whether the measuring device has been configured correctly.
Current output 1 to 2 simulation 
Navigation  Expert → Diagnostics → Simulation → Curr.out. 1 to 2 sim.
Description Switch the simulation of the current output on or off.
Selection • Off
• On
Factory setting Off