Micropilot FMR51, FMR52 HART
Operation options
Hauser
55
4. Installing the lock switch (WP) on the main electronics module in the
ON
position
enables the hardware write protection. Installing the lock switch (WP) on the main
electronics module in the
OFF
position (factory setting) disables the hardware write
protection.
If the hardware write protection is enabled: The
Hardware locked
option is
displayed in the
Locking status
parameter. In addition to this, the -symbol
appears in the header of the measured value display and in the navigation view
in front of the parameters.
X X X X
X X X
X
X
20.50
XX
XX
A0015870
If the hardware write protection is disabled: No option is displayed in the
Locking
status
parameter. The -symbol disappears in the header of the measured value
display and in the navigation view in front of the parameters.
5. Feed the spiral cable into the gap between the housing and main electronics module
and plug the display module into the electronics compartment in the desired
direction until it engages.
6. Screw the electronics compartment cover closed and tighten the securing clamp.
Summary of Contents for Micropilot FMR50
Page 183: ......
Page 184: ...www addresses endress com 71344017 71344017 ...
