Operation options
Ecograph T, RSG35
28
Hauser
Item
No.
Function
Description
"Maintenance required"
Maintenance is required. The measured value is still valid.
Error message "Failure detected"
An operating error has occurred. The measured value is no longer valid (e.g.
a channel not displayed in the current group is defective).
"External communication"
The device is communicating externally (e.g. via Modbus).
SIM
"Simulation"
Simulation is active.
7
"Historical data"
Historical data are currently shown on screen.
7.4.1
Symbols in operating menus
Symbol for setup
Symbol for diagnostics
Symbol for expert setup
Back
Use the "Back" function, which can be found at the bottom of each menu/submenu, to move up
a level in the menu structure.
To quit the menu immediately, press and hold "Back" (>3 sec.) in the Navigator. The
devices switches to display mode.
7.4.2
Symbols in the event logbook
Setup changes
Power on
Power off
Limit value on
Limit value off
1
Digital on (on/off message)
0
Digital off (on/off message)
Service
Texts saved / comments added
Acknowledging message
Back
Continue searching
7.5
Entering text and numbers (virtual keyboard)
A virtual keyboard is available for entering text and numbers. This is opened automatically
if needed. Here, turn the navigator to select the corresponding character and press the
navigator to accept it.
The following characters are available for entering free text: