Appendix
Ecograph T, RSG35
88
Hauser
"Security" submenu
Navigation
Expert → System → Security
Description
Contains settings that protect the unit against unauthorized operation and configuration.
Protected by
Navigation
Expert → System → Security → Protected by
Direct access code: 100006-000
Description
Configure how the device should be protected.
Options
Open access, access code, user roles
Factory setting
Open access
Access code
Navigation
Expert → System → Security → Access code
Direct access code: 100000-000
Description
Using this code, setup access can be protected from unauthorized persons. In order to
change any parameter the correct code must be entered. Factory setting: "0", i.e. changes
can be made at any time.
Hint: Make a note of the code and store in a safe place.
Only visible if "Protected by" = "Access code".
User entry
4-digit number
Factory setting
0
Set point code
Navigation
Expert → System → Security → Set point code
Direct access code: 100030-000
Description
If the unit is protected by an access code a set point code can also be defined. The user can
change the set points once the set point code is entered. All other operating positions
remain locked, however.
Only visible if an access code has been defined.
Factory default: "0" means that alarm set points can only be changed by entering the access
code.
Alarm set point code and access code should not be identical!
