Ecograph T, RSG35
Appendix
Hauser
165
Description
All recorded data are transmitted to an external WebDAV server (e.g. NAS). The format
can be specified or selected via
"Setup → Advanced setup → System → External memory
-> Save as"
.
Parameters
Description
Direct access code
Enable
Switch the WebDAV Client functionality on/off. When active, the device
copies the saved measured values automatically to the configured server.
Only possible using the Ethernet interface!
Selection:
No, Yes, Yes (SSL)
Factory setting:
No
472000-000
IP address
Enter the IP address of the WebDAV server here.
A DNS name can also be used.
Entry:
IP address
Factory setting:
0.0.0.0
472001-000
Port
This communication port is used to communicate with the WebDAV
Server.
If your network is protected by a firewall, this port may have to be
enabled. Please contact your network administrator if this is the
case.
Entry:
Numbers (max. 5 digits)
Factory setting:
80
472002-000
User name
Input of the user name that can access the WebDAV server.
Entry:
Text (max. 20 characters)
472004-000
Password
Password for accessing the WebDAV server.
Entry:
Text (max. 20 characters)
472007-000
Directory
Enter the directory in which the data should be saved.
Entry:
Text (max. 120 characters)
472005-000
Save as
"Protected format": All data are stored in a manipulation protected
encrypted format. They can be interpreted only by the PC analysis
software provided.
"Open format": data are stored in a CSV format, this can be opened by a
number of different programs (e.g. MS Excel) (Attention: no
manipulation security).
Selection:
protected format, open format (*.csv)
Factory setting:
protected format
472010-000
Test of WebDAV Client settings under
"Diagnostics → Simulation → WebDAV
Client"
.
16.1.6 "Diagnostics" submenu
Device information and service functions for a swift device check.
Only some of the diagnostic functions are available under Expert → Diagnostics. For
other functions, see Main menu → Diagnostics.
Actual diagnostics
Navigation
Expert → Diagnostics → Actual diagnostics
Direct access code: 050000-000
Description
Displays the current diagnosis message.
