Ecograph T, RSG35
Product description
Hauser
9
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers.
‣
If, despite this, modifications are required, consult with the manufacturer.
Repair
To ensure continued operational safety and reliability,
‣
Carry out repairs on the device only if they are expressly permitted.
‣
Observe federal/national regulations pertaining to repair of an electrical device.
‣
Use original spare parts and accessories from the manufacturer only.
Hazardous area
To eliminate a danger for persons or for the facility when the device is used in the
hazardous area (e.g. explosion protection, pressure vessel safety):
‣
Based on the nameplate, check whether the ordered device is permitted for the
intended use in the hazardous area.
‣
Observe the specifications in the separate supplementary documentation that is an
integral part of these Instructions.
2.5
Product safety
This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC
directives listed in the device-specific EC Declaration of Conformity. The manufacturer
confirms this by affixing the CE mark to the device.
2.6
Safety information for table version (option)
• The mains plug should only be inserted into a socket with a ground contact.
• The protective effect may not be suspended by an extension cable without a protective
ground.
• Relay outputs: U (max) = 30 V
eff
(AC)/60 V (DC).
2.7
IT security
The manufacturer only provides a warranty if the device is installed and used as described
in the Operating Instructions. The device is equipped with security mechanisms to protect
it against any inadvertent changes to the device settings.
IT security measures in line with operators' security standards and designed to provide
additional protection for the device and device data transfer must be implemented by the
operators themselves.
3
Product description
3.1
Product design
This device is best suited for the electronic acquisition, display, recording, analysis, remote
transmission and archiving of analog and digital input signals.